Instructional Guide
T180 PROFESSIONAL™ KERATIN TREATMENT SYSTEM
SMOOTHING TREATMENT
For Use by Licensed Professionals Only
(Read all instructions and refer to video before starting treatment)
- 1. Evaluate the client’s hair, e.g., normal, damaged, dry, or brittle
- 2. Apply on dry hair (washed or unwashed). It is not necessary to wash your hair unless it is; a) extremely dirty, b) has gel residue, c) was washed recently with anti-dandruff shampoo.
- 3. If hair has an excessive amount of chemical residue or has been chemically relaxed (i.e., Japanese, or permanent straightening), wash client’s hair (repeat if necessary) with T180 PROFESSIONAL™ Deep Cleansing Shampoo (free of parabens, salt, sulfates, and phthalates) before applying the T180 PROFESSIONAL™ Keratin Treatment. Rinse and dry thoroughly before applying the treatments.
- 4. Apply a few drops of T180 PROFESSIONAL™ Protective Serum only on the ends or the sensitized parts of dry hair.
- 5. Divide the hair into 4 parts, e.g., same as coloring. Then start the application of T180 PROFESSIONAL™ Keratin Treatment System, at the nape in 1-2 inch sections working up to the top of the head, apply 1/2” to 3/4” from the scalp to the tips, (including the most resistant parts without touching the scalp).
- 6. Press the foam pump 2 – 3 times, (refer to the video). Top, middle, and ends. Spread the foam with your gloved hands, ensuring the distribution of the product and then comb gently, without pulling or stretching the hair.
- 7. Place a plastic cap on your client’s hair and leave under the heat source during the time shown in the Smoothing Parameters Heat Table. Remove from heat source. Refer to “Extra Time Without Heat” in the Smoothing Parameters Heat Table for the exact amount of time-based on hair type and texture.
HEAT TIMETABLE FOR T180 PROFESSIONAL™ SMOOTHING, RESTORING, AND VOLUME REDUCTION TREATMENTS
HAIR TYPE | MINIMUM UNDER HEAT SOURCE (MINUTES) | MAXIMUM UNDER HEAT SOURCE (MINUTES) |
---|---|---|
FINE, FRAGILE, and or DAMAGED, | 10 | 15 |
HIGHLIGHTED and or COLOR TREATED | 10 | 15 |
NORMAL and or RESISTANT | 15 | 30 |
coarse and or VERY RESISTANT | 20 | 40 |
8. Remove the product with water only using the table below:
PRODUCT REMOVAL PARAMETERS TABLE
HAIR TYPE AND TEXTURE | ||
---|---|---|
FINE, FRAGILE, DAMAGED, HIGHLIGHTED and or COLORED TREATED HAIR |
NATURAL (untreated, unprocessed) and or RESISTANT |
COARSE and or VERY RESISTANT |
80 to 90% (50 Seconds) | 40 to 50% (30 Seconds) | 20 to 30% (15-20 Seconds) |
- 9. Blow-dry hair with a round brush. The use of an ionic blow dryer promotes better results during treatment.
- 10. Use a few pumps of T180 PROFESSIONAL™ Protective Serum on the hands and apply throughout the hair.
- 11. Starting in the nape (same as treatment application), apply the flat iron from the hair root to the tips. A flat iron of titanic or ceramic with at least 1-¼ inch width is recommended.
T180 PROFESSIONAL™ SMOOTHING PARAMETERS TABLE
Do not exceed the temperatures indicated the Smoothing Parameters Table.
Titanium or Ceramic Flat Iron 1 ¼” to 1 ½” in width is recommended |
HAIR TYPE AND TEXTURE | ||
---|---|---|---|
FINE, FRAGILE, DAMAGED, HIGHLIGHTED and or COLOR TREATED |
NATURAL (untreated, unprocessed) and or RESISTANT |
COARSE and or VERY RESISTANT |
|
FLAT IRON TEMPERATURE | 180 ºC to 210 ºC (356 ºF to 410 ºF) | 230 ºC (445 ºF) | 230 ºC (445 ºF) |
FLAT IRON BY HAIR STRANDS | 4 to 8 times | 8 to 15 times | 10 to 20 times |
LONG-LASTING EFFECT (MONTH) | Up to 3 Months | Up to 4 Months | Up to 4 Months |
- 12. Wait at least 48 hours to wash hair after the treatment with T180 PROFESSIONAL™ Vitalizing Shampoo; free of parabens, salt, sulfates, and phthalates.
- 13. For the best long-lasting results use T180 PROFESSIONAL™ shampoos, conditioners & other aftercare products.
T180 PROFESSIONAL™ KERATIN TREATMENT SYSTEM
VOLUME REDUCTION AND SPLIT ENDS TREATMENT
For Use by Licensed Professionals Only
(Read all instructions and refer to video before starting treatment)
- 1. Evaluate the client’s hair, e.g., normal, damaged, dry, or brittle.
- 2. Apply on dry hair (washed or unwashed). It is not necessary to wash your hair unless it is; a) extremely dirty, b) has gel residue, c) was washed recently with anti-dandruff shampoo.
- 3. If hair has an excessive amount of chemical residue or has been chemically relaxed (i.e., Japanese, or permanent straightening), wash client’s hair (repeat if necessary) with T180 PROFESSIONAL™ Deep Cleansing Shampoo (free of parabens, salt, sulfates, and phthalates) before applying the T180 PROFESSIONAL™ Keratin Treatment. Rinse and dry thoroughly before applying the treatment.
- 4. Apply a few drops of T180 PROFESSIONAL™ Protective Serum only on the ends or the sensitized parts of dry hair.
- 5. Divide the hair into 4 parts, e.g., same as coloring. Then start the application of T180 PROFESSIONAL™ Keratin Treatment System, at the nape in 1-2 inch sections working up to the top of the head, apply 1/2” to 3/4” from the scalp to the tips, (including the most resistant parts without touching the scalp).
- 6. Press the foam pump 2 – 3 times, (refer to the video). Top, middle, and ends. Spread the foam with your gloved hands, ensuring the distribution of the product and then comb gently, without pulling or stretching the hair.
- 7. Place a plastic cap on your client’s hair and leave under the heat source during the time shown in the Smoothing Parameters Heat Table. Remove from heat source. Refer to “Extra Time Without Heat” in the Smoothing Parameters Heat Table for the exact amount of time-based on hair type and texture.
HEAT TIMETABLE FOR T180 PROFESSIONAL™ SMOOTHING, RESTORING, AND VOLUME REDUCTION TREATMENTS
(Reminder: add 20 minutes if used without heat source)
HAIR TYPE | MINIMUM UNDER HEAT SOURCE (MINUTES) | MAXIMUM UNDER HEAT SOURCE (MINUTES) |
---|---|---|
FINE, FRAGILE, and or DAMAGED, | 10 | 15 |
HIGHLIGHTED and or COLOR TREATED | 10 | 15 |
NORMAL and or RESISTANT | 15 | 30 |
coarse and or VERY RESISTANT | 20 | 40 |
- 8. Completely remove the product with water only. If you prefer, hair can be gently washed with T180 PROFESSIONAL™ Vitalizing Shampoo; free of parabens, salt, sulfates, and phthalates.
- 9. Rinse, towel dry hair, and blow-dry (ionic is recommended). A round brush is recommended.
- 11. Finalize by applying 1 to 3 pumps of the T180 PROFESSIONAL™ Protective Serum.
- 12. For the best long-lasting results use T180 PROFESSIONAL™ shampoos, conditioners & other aftercare products.
T180 PROFESSIONAL™ KERATIN TREATMENT SYSTEM
RESTORATIVE TREATMENT
For Use by Licensed Professionals Only
(Read all instructions and refer to video before starting treatment)
- 1. Evaluate the client’s hair, e.g., damaged, dry, or brittle.
- 2. The T180 PROFESSIONAL™ Restorative Treatment is essential if the hair is badly damaged, dry, or brittle, especially before using the T180 PROFESSIONAL™ Keratin Treatment System. This is a 1-3-treatment plan every other week until hair is healthy.
- 3. Wash the hair with T180 PROFESSIONAL™ Deep Cleansing Shampoo; free of parabens, salt, sulfates, and phthalates, to eliminate residue from previous procedures or treatments (repeat if necessary), rinse well. Towel dry the hair, and comb.
- 4. Apply the T180 PROFESSIONAL™ Restorative Cream (start with a ¼ oz and use more if necessary) from root to tip. Comb through thoroughly.
- 5. Place a plastic cap over hair and leave:
- a. 15 minutes without heat.
- b. 10 minutes with medium heat.
- 6. Rinse well to remove the product. Towel dry the hair.
- 7. Blow-dry (ionic is recommended).
- 8. Repeat this treatment at least two more times, as described in # 2.
- 9. After each application, the Licensed Professional will determine if the hair is ready for the T180 PROFESSIONAL™ Keratin Treatment System or if more Restorative Treatments are necessary.
- 10. For the best long-lasting results use T180 PROFESSIONAL™ shampoos, conditioners & other aftercare products.
COLOR TREATMENTS: Client’s hair can be color-treated the same day they receive the T180 Professional™ Restorative Treatment.
What our customers are saying:
"I recently had the opportunity to try some of the hair products by Transcends Beauty. All I can say is “WoW“ and thank you. Having straight hair with no body, makes it a challenge to find products that work for me. After using Transcends shampoo, conditioner, and hair mask I was amazed at the bounce and fullness my hair has. My hair actually felt healthy for the first time in a very long time. It’s a bonus that Transcends products are all natural and vegan based."
Nancy F.Eustis, FL
“These products are amazing. I used all four of them after coloring my hair. First the shampoo, next the hydrating mask and then the conditioner. Right before blow drying my hair, I used a bit of the protective serum. For the first time in my life I did not have to use the flat iron. The end result is shown in the photo, that I took right after.”
Kasia F.Poland
“Loved the shampoo, mask and serum. Hair after shampoo felt very clean, I towel dry and applied the mask. I usually take 40 minutes to flat iron my hair but not this time. It took 15 minutes and it looks amazing, what a time saver."
Iris G.Orlando, FL
Previous
Next